The first guitar amp for the new generation of Traynors is the
Custom Valve 40 (YCV40). Real tube overdrive is provided by
three 12AX7WA dual triode preamp tubes while real tube power is provided by two 5881WXT beam power tubes. The internal gadgetry
in this channel switching amp provides good flexibility, but makes it very easy to get a great tone. The combination of the tube power and the Celestion™ Red Label speaker is magical. The three basic tones (clean, crunch and overdrive) are easily defined. With great tone at low levels, and shine and punch at full tilt, the Custom Valve 40 is already receiving rave reviews. We challenge you to compare us to the competition. You'll love the tone and instantly recognize the value.
Although signal-to-noise is not normally a specification that is discussed where guitar amplifiers are concerned, the ultra-quiet Custom Valve 40 makes it an issue. Experienced professional users will appreciate the auto-matching tube circuit that maintains bias balance as tubes age ensuring hum free performance. Also, the DC filaments on the preamp tubes that all but eliminate hum. Listen carefully. Although the YCV40 has a tremendous amount of gain it remains virtually hum free.
The unique "nouveau-retro" packaging of this amp makes it perfect for the leading edge or historical enthusiasts. Though the look is very fresh, the Custom Valve 40 stays true to the original Traynor line with black vinyl-covering, chrome plated corners, all plywood construction, and a classic front-mounted Traynor logo. The rear mounted control panel is easy to access, yet recessed for protection.
Features
- Auto-matching tube circuit maintains bias balance as tubes age ensuring hum free performance throughout tube life.
- DC filaments on preamp tubes eliminate hum.
- Fully regulated power supply with tube rectifier emulation.
- Long Accutronics spring reverb.
- Classic Celestion™ speaker.
- All plywood enclosure.
- Heavy gauge perforated grille with cloth cover.
- Custom design "Chicken Beak" knobs.
Specifications
| Type | Tube Guitar Amplifier |
|---|
| Cabinet Impedance (Ohms) | 8 |
|---|
| Power @ min. impedance (Watts) | 40 |
|---|
| Minimum Impedance (Ohms) | 4 |
|---|
| Speaker Configuration - LF (Size / Power) | 12 inch / 40 Watts |
|---|
| Inputs | 2 |
|---|
| Channel 1 - inputs | 1/4 inch phone |
|---|
| Channel 1 - controls | Gain, Volume, Treble, Bass, Middle |
|---|
| Channel 1 - switches | Boost |
|---|
| Channel 2 - inputs | Shares ch 1 input |
|---|
| Channel 2 - controls | Volume, Treble, Bass, Middle |
|---|
| Channel 2 - switches | Channel Select, Brightness |
|---|
| Channel Switching | Yes |
|---|
| Main Tone Controls | Presence |
|---|
| Line Out (type / configuration) | 1/4 inch TRS / Rear (Effects Send) |
|---|
| Effects Volume | Yes |
|---|
| Effects Loop / Location | Yes / Rear |
|---|
| Effects Footswitch / Function | Yes / Channel Select, Boost |
|---|
| Internal Reverb / Effects | Spring Reverb |
|---|
| LED Indicators | Channel Select, Boost, Power, Standby |
|---|
| External speaker output / location | 1/4 inch / Rear |
|---|
| Other Features | Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use.
Auto Tube-matching Circuit
Preamp Tube - 3x 12AX7WA Dual Triodes (Russia)
Power Amp Tube - 2x 6L6GB Beam Power Tubes (Russia)
DC filaments on preamp tubes eliminate hum
Fully regulated power supply with tube rectifier emulation
Perforated Steel Grille
|
|---|
| Dimensions (DWH, inches) | 9.5 x 23 x 18 |
|---|
| Dimensions (DWH, cm) | 24 x 58 x 46 |
|---|
| Weight (lbs / kg) | 45 / 20.4
EL AMPLI ES 100 VOLTS NO INCLUYE FUENTE 110220
|
|---|
