Motherboard Msi 945p Neo3 Impecable!!!

• Supports Socket 775 for Intel® Core 2 Duo, P4 5XX, 6XX, P4EE, Pentium D 8XX, 9XX and Celeron D processors.
• Supports FSB 1066/800/533MHz.
• Supports EIST technology.
• Supports Intel® Hyper-Threading technology.
• Supports Intel® Dual Core Technology to 800MHz and up.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset

• Intel® 945P Chipset
- Supports FSB 533/800/1066MHz.
- Supports PCI Express x 16 graphics interface.
- Supports dual channel, DDR2 400/533/667 (4GB Maximum) 

• Intel® ICH7 Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 8 ports.
- 4 SATAII ports with transfer rate up to 3Gb/s.
- 1 channel Ultra ATA 100 bus master IDE controller.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 compliant.

On-Board IDE/SATA  

• One Ultra DMA 66/100 IDE controllers integrated in ICH7.
- Supports PIO, Bus Master operation modes.
- Can connect up to two Ultra ATA drives.

• SATAII controller integrated in ICH7
- Up to 3Gb/sec transfer speed.
- Can connect up to four SATAII devices.

Audio 

• AC97 link controller integrated in Intel® ICH7 chip.
• Realtek® ALC850 8 channels audio codec .
- Meet PC2001 audio performance requirement
- Compliance with AC97 V2.3 spec.

LAN 

• Realtek® RTL8110SC/8100C
- Supports 10/100/1000 Mb/s. (1000Mb/s for 8110SC only) 
- Compliane with PCI 2.2.
- Supports ACPI Power Management.

Internal I/O Connectors

- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- CPU / System / Power FAN connectors
- CD-in connector
- Clear CMOS jumper
- Chassis intrusion switch connector
- IrDA infrared module header 
- Serial port connector
- Front panel audio connector
- Front panel connector
- 2 x USB 2.0 connector support additional 4 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATAII connectors
- 1 x ATA100 connector