Adaptador Sata Hdd To Ide Conversor Inversor Z/norte

SUPER CONVERSOR INTERNO PARA PC

SATA HDD TO IDE O IDE TO HDD SATA

NO TIRES TU RIGIDO INCOMPATIBLE Y/O NO CAMBIES TU MOTHER VIEJO !!

Native SATA Drive to IDE 40-pin Adapter for Most Enclosures

SATA to IDE Converter - Converts SATA Drive to IDE

A perfect solution for converting SATA or SATA II devices to IDE ATA 40-Pin UDMA-133/100 interfaces

JMicron JM20330 chip-set and supports 3.5" IDE hard drives and 5.25" optical drives. It's compliant with IDE specification and supports up to UDMA/133 drives!

This Adapter tested to work with Western Digital, Seagate, Hitachi, Maxtor, Toshiba, Fujitsu and Samsung Drives ranging in Capacity from 80GB up to 2,500GB (2.5TB).

PLUG & PLAY

Feature Compliance

• Serial ATA 1.0 Specification compliant

Overall • Automatic Serial ATA 3.0/1.5 Gbps speed negotiation

• ATA/ATAPI PIO mode 0 to 4

• ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.

• ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count

• Support Serial ATA hot-plug

• Ultra low power consumption

• Work for both AC and DC couple between the transmitter and the receiver

• Provide specified OOB signal detection and transmission

• Support Spread Spectrum Clocking to reduce EMI

• Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock

• Support Partial/Slumber power management

• Provide adjustable TX signal amplitude and pre-emphasis level

• Master IDE Device support

Product Requirements:

Windows 98/SE/ME/2000/XP/2003/Vista/Linux operating system

Available 4-pin power supply connector

SATA I or SATA II Device