Hc-05 Wireless Bluetooth Rf Transceiver Module Serial Rs232

Descripción

1(un) modulo Bluetooth RF Transceiver HC-05 de 6PIN Wireless Module serial RS232 TTL

Este modelo Incluye un regulador ML6206

Super tecnico:
Size:35mm x15mm /1.38"x0.59"(inch) (approx)
HC-05 could be setting to Master or Slave by user. HC-06 can only be Master or Slave which could be customized. This module default is HC-06 with Slave mode.
Note: Be paired must Master devices and Slave devices each other. Master and Master devices, Slave and Slave devices can't pair each other. Slave mode could paired with PDA, PC etc.
Specifications:
* Bluetooth protocal: Bluetooth Specification v2.0+EDR
* Frequency: 2.4GHz ISM band
* Modulation: GFSK (Gaussian Frequency Shift Keying)
* Emission power: =4dBm, Class 2
* Sensitivity: =-84dBm at 0.1% BER
* Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
* Size: 28mm x 15 mm x 2.35mm
* Security: Authentication and encryption
* Profiles: Bluetooth serial port
* Power supply: +3.3VDC 50mA
* Working temperature: -20 ~ +75 Centigrade
Product Features:
1.The core module using HC-05 from the module, leads to interface to VCC, GND, TXD, RXD, the KEY pin and LED status leads to the foot (STATE).
2.LED indication Bluetooth connection is connection status, flash that there is no Bluetooth connection, slow flash into the AT mode, dual-flash Bluetooth is connected and open port.
3.Base plate set anti-reverse diode with 3.3V LDOs , input voltage:3.6V-6V, unpaired: about 30mA.
4.The interface power level 3.3V,can be directly connected a variety of microcontroller(51,AVR,the PIC, ARM, the MSP430) and 5V MCU.
5.Bluetooth Distance:10M.
6.After pairing when full-duplex serial without having to know any of the Bluetooth protocol to support data bits, 1 stop bit, you can set the parity communication format, which is the most common communication format does not support other formats.
7.Can set the parameters and query information via the AT command mode by pulling up 34 feet.
8.Small size, factory chip production, to ensure that the patch quality. And sets of transparent heat-shrinkable tube, dust appearance, and there is some anti-static capability.
9.Can switch host and slave mode by changing AT command, the specified equipment can be connected through the AT command.
10.Support standard baud rate from 4800bps-1382400bps.

1.4 Usage:
After pairing just as the same as using the serial port baud rate can be fixed , so long as it is " fixed baud , 8 data bits, no parity ," communication format of serial devices can be wired directly to the serial port and replace the original do not need to modify the program . Such as data acquisition , smart car , serial printers, dot matrix screen control , such as outdoors .
Paired with a computer : fit between computers via Bluetooth serial communication with the device , using the same method and serial
Paired with the phone : Good room phone via Bluetooth serial communication with devices using the same method and serial
Paired with a Bluetooth Host : For two devices directly via Bluetooth serial communication, such as between the microcontroller and microcontroller serial cable with microchips , etc., using the same method and serial

Flexible use:
Baud rate conversion , because the receiver and the sender can choose their own baud rate , in a small amount of data when you can use as a device baud rate conversion .

CUANDO PUEDO RETIRAR:
=======================
Podes Pasar de Lunes a Viernes de 16 a 20hs
Las entregas se realizan en Almagro - Caballito, sobre Av. Rivadavia, Cap.Fed.

Te acercan: Subte A est: Rio de Janeiro, y los colectivos: 15, 65, 85, 112, 2, 5, 8, 86, 88, 103, 132, 26, 105
A unas 4 a 5 cuadras te dejan el: 84, 55, 135, 25, 181