Amplificador Potencia Crown D 150 No Dc300 Carver Qsc Jbl

Descripción

Amplificador Potencia Crown Hi Fi

STEREO SPECIFICATIONS

OUTPUT POWER
80 watts per channel minimum RMS (both channels operating) into an 8 ohm load over a bandwidth of 1Hz-20KHzat a rated RMS sum total harmonic distortion of 0.05% of the fundamental output voltage.

FREQUENCY RESPONSE
±0.1dB DC-20KHz at 1 watt into 8 ohms; ±1dBDC-100KHz.

1KHZ POWER
90 watts RMS into 8 ohms, per channel, both channels operating, 0.1% total harmonic distortion.

HARMONIC DISTORTION
Less than 0.001% from 20Hz-400Hz, and increasing linearly to 0.05% at 20KHz a t 80watts RMS per channel into 8 ohms.

I.M. Distortion (60Hz-7KHz4:1)
Less than 0.05% from 0.01 watt to 0.25 watts and less than 0.01% from 0.25 watts to 80watts into 8 ohms, per channel.

SLEWING RATE
6 volts per microsecond (slewing rate is the maximum value of the first derivative of theoutput signal, or the maximum slope of the output signal)

DAMPING FACTOR
Greater than 400, DC-400Hz into 8 ohms

OUTPUT IMPEDANCE
Less than 15 milliohms in series with less than 3 microhenries

LOAD IMPEDANCE
Rated for 8 ohm usage; safely drives-any load including completely reactive loads

VOLTAGE GAIN
20.6±2% or 26.3±.2dB at maximum gain

IMPUT SENSITIVITY
1.19 volts ±2% for 80 watts into 8 ohms



En internet hay un vídeo donde la comparan con una mcintosh de tres mil dólares, lo comento como una referencia de la calidad de su sonido