Placa De Desarrollo Stm32 F446 Re 180 Mhz

Descripción

Producto original de USA.

All features
Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
Memories
512 Kbytes of Flash memory
128 Kbytes of SRAM
Flexible external memory controller with up to 16-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memories
Dual mode QuadSPI interface
LCD parallel interface, 8080/6800 modes
Clock, reset and supply management
1.7 V to 3.6 V application supply and I/Os
POR, PDR, PVD and BOR
4 to 26 MHz crystal oscillator
Internal 16 MHz factory-trimmed RC (1% accuracy)
32 kHz oscillator for RTC with calibration
Internal 32 kHz RC with calibration
Low power
Sleep, Stop and Standby modes
VBAT supply for RTC, 20×32 bit backup registers plus optional 4 KB backup SRAM
3× 12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
2× 12-bit D/A converters
General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
Up to 17 timers: 2x watchdog, 1x SysTick timer and up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to four IC/OC/PWM or pulse counter
Debug mode
SWD and JTAG interfaces
Cortex®-M4 Trace Macrocell™
Up to 114 I/O ports with interrupt capability
Up to 111 fast I/Os up to 90 MHz
Up to 112 5 V-tolerant I/Os
Up to 20 communication interfaces
SPDIF-Rx
Up to 4× I2C interfaces (SMBus/PMBus)
Up to four USARTs and two UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
Up to four SPIs (45 Mbits/s), three with muxed I2S for audio class accuracy via internal audio PLL or external clock
2x SAI (serial audio interface)
2× CAN (2.0B Active)
SDIO interface
Consumer electronics control (CEC) I/F
Advanced connectivity
USB 2.0 full-speed device/host/OTG controller with on-chip PHY
USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
Dedicated USB power rail enabling on-chip PHYs operation throughout the entire MCU power supply range
8- to 14-bit parallel camera interface up to 54 Mbytes/s
CRC calculation unit
RTC: subsecond accuracy, hardware calendar
96-bit unique ID