Placa Controladora De Vuelo Cc3d Evo Drones Fpv Open Pilot

Descripción

Firmware BetaFlight

This CC3D EVO Flight Controller Side Pin card has a smooth feature that makes it directly compatible with satellite receivers without the need for any additional cables. It also supports S.BUS. Evo is equipped with a powerful 32-bit STM32 processor with 128kb Flash and 20kb RAM. The 3-axis MEMs technology is used for both gyro and accelerometer.

The CC3D EVO Flight Controller Side Pin card is easy to use with your computer. With USB and BetaFlight software, the card can be programmed in Windows, Mac, or Linux without the need for any drivers to install. OpenPilot is a very user-friendly program designed to be used by anyone, regardless of programming experience.

The CC3D EVO Flight Controller Straight Pin and CC3D EVO Flight Controller side Pin boards may not have any technical difference. There is the only difference between connector pins.(one has a Straight pin and other have 90º side pin.)

Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.


CC3D EVO Hardware Features :

* WIth a function of being directly plugged into the satellite receiver(It needn’t conversion cable)
* Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
* 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
* Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
* Software support for Windows, Mac, and Linux.
* Direct high-speed USB support with no drivers required, a true plug and play device.
* Spektrum satellite receiver support.
* Futaba S-BUS hardware support.
* Innovative Flexi-port technology for superior port flexibility.
* 4Mbits onboard EEPROM for configuration storage.


Flexiport :

Copter Control also offers the innovative Flexiport which provides either I2C connectivity or a second serial port. Flexiport gives Copter Control the flexibility to use either I2C and a single serial port or dual serial port, according to your connectivity needs.


Superior user experience :
* BetaFlight has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed.

* A standard mini USB cable (not includes) is used to load the latest firmware and configure everything for your unique airframe.The BetaFlight project, whilst still young, it trying to make Open Source much more user-friendly.

* BetaFlight software is designed to be used by everybody! All major operating systems are supported and install packages are provided.

* The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it.


Sensors and Components :

* 3-axis Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
* Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
* Simultaneous support for multiple receivers.
* ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
* MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
* FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
* 10 PWM outputs to servos or ESC’s, or for camera stabilization
* Camera stabilization supports up to 3axis camera mounts with stabilization and manual control from any of configured receivers.
* Onboard USB connectivity for easy configuration.
* USB and serial telemetry and configuration
* Supported by powerful BetaFlight GCS
* 4 Mbit onboard memory
* 3C Quaternion based complementary filter running at 500Hz


Package Includes :

1 x BetaFlight CC3D EVO Flight Controller with Side Pins
1 x Connecting Wires.
1 x PC plastic shell

--------------------------------------------------------------------------------------------------

SOMOS: — RC NITRO ARGENTINA —
Tienda Oficial en: https://listado.mercadolibre.com.ar/_CustId_6666656

• Estamos ubicados en Capital Federal en el barrio de Villa Crespo.
• Contamos con un Showroom de TODOS nuestros productos.
• Emitimos Factura electrónica tipo A y B.
• Ofrecemos Garantia "REAL" para nuestros productos.
• Realizamos envíos a todo el pais.

HORARIOS DE ATENCIÓN
Lunes a Viernes de 14 a 19hs.
Sábados de 11 a 14 hs.
Domingos y Feriados cerrado.
Atención ONLINE 24Hs por Facebook Messenger.

Dónde estamos y Cómo llegar?
• Estamos ubicados en Capital Federal en el barrio de Villa Crespo.
Sobre la Av. Corrientes a la altura de la Av. Juan B. Justo.

• Subtes: Línea B - 3 Cuadras de las Estaciones Malabia o Dorrego.
• Tren: Estación Chacarita del Tren San Martín.


RETIRO DE MERCADERÍA PERSONALMENTE
Podés retirar personalmente con tu DNI, o bien enviar a otra persona con su DNI personal y además la fotocopia de tu DNI.

MERCADOENVÍOS A TODO EL PAIS
A través de OCASA (Correo Argentino y Moto Norte) y con seguro. Las fechas de entrega para este medio de envío son estimadas, ya que dependen de la empresa de transporte.

ENVIOS AL INTERIOR DEL PAÍS POR ÓMNIBUS
Despachamos la encomienda por la empresa de micros que nos indique y usted deberá abonar el valor del envío al momento de retirar la encomienda de la terminal de ómnibus de su localidad.

Garantía del vendedor: 15 días